Installation Note

The cylinder head may be fitted with the engine remaining in the car.

1. Place cylinder head gasket into correct position.

2. Fit cylinder head. Tightening sequence:

3. Replace gaskets, seals and O-rings before fitting the cylinder head. Tighten nuts and bolts to the specified torque.

4. Top up coolant and bleed cooling system. Warm up engine to operating temperature, check coolant level again and top up if required.

271-15

For unbolting, follow opposite sequence.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment