If the ignition steering lock cannot be turned to 6 R steering column switch the "0" position, the cable adjustment must be corrected as follows:

Set selector lever to position "P". Turn ignition steering lock to position "II" and then turn back to position "0" again. Adjust bowden cable, turning the bowden cable at the slide housing (No. 1) until distance (A) between the notch at the locking slide (No. 2) and the mark edge at the gate (No. 3) is 6 mm.

When turning the cable, use a second wrench to lock at the square of the slide housing (No. 4).

7. Align steering column stalk as follows:

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment