Note

Brake pads must be replaced for the complete axle when the brake-pad warning lamp lights up, but at the latest when the pads have worn down to 2 mm. If the brakepad wear is indicated by the warning lamp, the warning contact (sensor including cable and connector) must also be replaced. It is possible to avoid replacing the warning contact if the brake pads are replaced when worn down to 2.5 mm at the latest. Warning contacts must be replaced if the core of the cable has been exposed. If only the plastic part of the warning contacts has been rubbed, however, it is not necessary to replace it.

1. To check the rear brake pads, remove the rear wheels*. The front pads can be checked with the wheels remaining on the car.

578-46
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment