Passenger compartment wiring harness for 968 CS

When replacing the passenger compartment wiring harness, the spare wiring harness must be modified as only the harness for the 968 is supplied by the spares department. Modifications are required at the clock connector.

1. Open 7-pin coupling housing (outside temperature indicator on 968) and remove wire.

2. Cut off terminal sockets of brown/blue and blue/green wires. Insulate wires and tie them aside.

3. Fit the remaining wires into 4-pin housing according to wiring diagram or below table (may be removed from old wiring harness).

4. Tie back wire for analog clock (center console).

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment