Removal and installation notes



When working on the gear set, it is not necessary to remove the differential.

1. Clamp transmission with Special Tool VW 540 into assembly stand and drain transmission oil.

Installation Note

To avoid damaging the seal, install drive shaft seal only after the gear set has been installed.

1. Coat end shield/transmission housing sealing surface with sealant (Loctite 573) and place full gear set carefully into transmission housing.

2. Drive adapter sleeves into position and tighten mounting screws to 25 Nm (18 ftlb)

3. Fit seal for drive shaft (refer to page 34 - 7).

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment