Removing and installing front impact sensors Note

The front impact sensors are placed high up on the left and right wheel house walls in the driver and passenger footwells.

The Installation position is determined by the mounting.

1. Disconnect battery and cover terminal or battery, respectively.

2. Remove control unit for cruise control and disconnect connectors T 19 and T 28 (for left-hand front sensor only).

3. Disconnect connector for front impact sensor.

4. Undo shear-off nuts using Special Tool 9259.


Special Tool 9259 Note

To tighten the shear-off nuts, use 1/4 inch Allen key.

The mounting locations at the body must be cleaned down to the bare metal.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment