Removing and installing gear set

No.

Designation

Removal

Installation

1

Shift catch (black)

1

Do not confuse with shift catch (No. 2) Tightening torque 70 Nm (52 ftlb)

2

Shift catch (light)

3

Do not confuse with shift catch (No. 1) Tightening torque 70 Nm (52 ftlb)

3

Bolt M 8 x 22

3

Insert with Loctite 573 and tighten to 25 Nm (18 ftlb)

4

Cover

1

5

Sealing ring

1

Replace

6

Reverse light switch

1

Tighten to 20 Nm (15 ftlb)

7

Selector shaft with shift cylinder

1

8

Adapter sleeves

2

Use Special Tool 9532 to drive out

9

Bolt M 8 x 36

12

Tighten to 25 Nm (18 ftlb)

10

Full gear set

1

11

Shaft seal

1

May be replaced without dismantling the transmission (refer to page 34-7)

Replace, fit only after gear set has been installed as it may otherwise be damaged. Pack space between sealing lip and dust lip with multi-purpose grease

12

Transmission housing

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment