Removing and installing injection valves


1. Detach and remove cover for injection valves and plug leads. Unclip plastic cover and leave suspended at plug leads.

2. Pull off vacuum hose at pressure regulator and electric connector at oil temperatur sensor (cylinder head).

3. Undo fuel distributor pipe at intake distributor and take out from above. Pull off electrical connector and retaining clamp at injection valve. Take out injection valve and catch overflowing fuel in a suitable container.


1. Replace injection valve seals. Oil seating bore of seals lightly.

2. Check visually for leaks.

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment