Removing and installing transmission wiring harness

Removal

Installation

1. Remove hydraulic control unit (refer to page 1. Push sleeves for solenoids all the way up to

the stop.

2. Mark connector sleeves for reinstallation and pull them off the solenoids.

3. Open up tabs and take off wiring harness.

1 = Tabs A = Solenoid 1 B = Solenoid 3 C = Solenoid 2 D = Solenoid 4

E = Solenoid for pressure regulator

Solenoids

Wiring colors

A

Solenoid 1

purple and red

B

Solenoid 3

purple and green

C

Solenoid 2

purple and grey

D

Solenoid 4

purple and yellow

E

Pressure regulator

purple and blue

2. Fit wiring harness using the tabs.

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment