Test Point 13

Position switch on drive - Check triggering of actuators.

closed during activation Ground must be present at connectors T27 and T28, terminals 1

and 7, in the quiescent state.

Note

Positive voltage must be present at terminal 7 when the actuator is triggered in "open" direction.

Positive voltage must be present at terminal 1 when the actuator is triggered in "closed" direction. Check directly at actuators if required.

Note

The actuators are only triggered for several milliseconds.

Fault, fault code Possible causes, remedies, notes

- Check wires from alarm control unit plug I, terminals 11 and 12, to the acutators for continuity.

- Check position switch at actuator (refer to Test Point 4).

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment