Changing the transmission oil Manual transmission

Capacity: approx. 2,75 I Oil quantity:

Hypoid transmission oil SAE 75 W 90 to API GL5 or MIL-L 2105 B

1. Drain oil with the car standing on a level surface and the transmission at operating temperature.

Funny Probation Cartoons And Clip Art

1 - Magnetic drain plug

2 - Filler plug

2. Clean drain and filler plugs, tighten plugs to 35 Nm (22 ftlb).

3. With the vehicle on a level surface, fill in transmission oil, until it overflows at the filler plug neck.

Note

On initial production cars, the thread of the filler plug in the lateral transmission covers was located 6 mm too high. When filling those transmissions with 2,75 I of transmission oil, the oil level is 6 mm below the filler neck bore.

The relevant transmissions are identified by a + 6 mark above the filler plug.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment