Checking dimension E

1. Fit drive pinion with measured adjustments shims "S3" and "S4" and rotate several times in both directions.

Deviation "r" inscribed on ring gear

2. Insert universal measuring mandrel and check the dimension.

Thickness of shim "S3" 0,89 mm

S3 shims available as spare parts: Thickness in mm

0,45 - 0,50 - 0,55 - 0,60 - 0,65 - 0,70 - 0,75 -0,85

3. If the correct adjustment shims have been fitted, the dial gage, read off counterclockwise, must indicate the inscribed deviation "r" with a tolerance of ± 0.04 mm.

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment