Cleaning the entire engine oil system after an engine failure bearing failure

Note

This cleaning sequence is only intended to give pointers as to whereyou may find chips. The actual amount of work involved will depend oneach individual case of engine damage.

Replace the following parts:

- Hydraulic valve tappets

- Oil pressure relief valve (crankcase)

- Oil filter

The following parts must be dismantled, inspected and cleaned thoroughly:

- Oil pump

- Thermostat housing

- Oil restraining valve in cylinder head

The following parts must be cleaned thoroughly and/or rinsedthrough repeatedly:

Note:

All oil bores may be rinsed through thoroughly with benzine and a commercially available oil/benzine syringe.

- Oil intake pipe

- Oil drain pipe

- Crankcase

- Crankshaft

- Cylinder head

- Oil lines

- Oil cooler

- Oil filler neck

Change oil filter and engine oil after approx. 500 km.

Note:

After an engine failure, the entire intake system must be inspected for foreign bodies and/or oil and cleaned before assembly.

Cleaning the entire engine oil system after an engine failure (bearing failure)

Printed in Germany - VIII, 1993

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • Miska
    How to clean an engine after bearing failure?
    2 years ago

Post a comment