Instructions

Use a screwdriver to pierce the diaphragm in the nozzle fitting of the cartridge with component A (H1).

Open flanged cover of cartridge containing component A

Use the screwdriver handle to pierce the flanged cover at the end of the cartridge containing component A (H1).

Screw filling nozzle onto cartridge containing component A

Screw filling nozzle (H10) onto cartridge containing component A (H1).

Place cartridge with Place cartridge with component A (H1) into component A into bonding gun bonding gun (C).

Remove screw-on cap from mixing cartridge (H3).

10 Press component A into mixing cartridge

Insert filling nozzle (H10) of cartridge containing component A (H1) into mixing cartridge. Press component A into mixing cartridge (H3) using the bonding gun (C).

11 Open nozzle fitting of cartridge containing component B

Use a knife to cut off the tip of the nozzle fitting of the cartridge containing component B (H2).

12 Screw injector nozzle onto cartridge containing component B

Screw injector nozzle (H7) onto cartridge containing component B (H2).

13 Place cartridge with component B into bonding gun

Place cartridge with component B (H2) into bonding gun (C).

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment