Instructions

Mark position of adhesive plate on outside of windshield. Cabriolet: Dimension A = 623 mm Dimension B = 84 mm Coupé : Dimension A = 623 mm Dimension B = 142 mm

Remove adhesive residue from windshield mechanically using a scraper.

Remove adhesive residue from bonding plate of rearview mirror mechanically using a scraper.

Roughen bonding plate of rearview mirror mechanically using sanding paper.

Clean bonding plate of rearview mirror using cleaning solution (A).

Clean bonding area of windshield using cleaning solution (A).

Mask off bonding area of windshield using primer template (cover sheet C).

The position mark of the interior rearview mirror must be visible in the middle of the primer template.

Apply a thin coat of primer (B) to the masked bonding area of the windshield.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment