Instructions

From the luggage compartment side, undo 4 fastening nuts of end applicate. Remove end applicate.

Remove folding top gasket in area of side applicate from spot welding flange. Undo 8 screw fastenings of side applicate in area of folding top cover.

Undo two fastening screws in transition area of side applicate to end applicate. From luggage compartment side, undo 4 fastening nuts of side applicate. Undo screw fastening of side applicate. Undo screw fastening of shear-off device on tank filler neck cladding.

Starting from rear, detach glued-on side applicate from body by pulling it cautiously away.

Seal screw fastenings with butyl tape. Tack side applicate to body with butyl tape.

4 nuts M 6

2 sheet metal screws 4.2 x 13 8 countersunk sheet metal screws 4.2 x 16

Fit folding top gasket onto spot welding flange in area of side applicate.

4 nuts M 6

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment