Note

Check with Tester 9288 (actual values). Store faults as of engine speed = 2800 rpm

1) Pull connector off Tiptronic control unit.

a) Measure resistance between pin 2 and pin 38. Nominal value approx. 1.1 kfi b) Check that pin 2 and pin 38 are free from shorts to ground.

2) Also pull off connector from speed sensor, transmission.

Check for continuity at Tiptronic control unit connector pin 2 to speed sensor connector pin 1

Check for continuity at Tiptronic control unit connector pin 38 to speed sensor connector pin 2

Short to ground pin 2 and pin 38 to pin 7 (ground)

Pin 2 and pin 38 to pin 20 (screening)

Short to positive pin 2 and pin 38 to pin 1 (positive)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment