Note

If the ignition steering lock cannot be turned to 6 R steering column switch the "0" position, the cable adjustment must be corrected as follows:

Set selector lever to position "P". Turn ignition steering lock to position "II" and then turn back to position "0" again. Adjust bowden cable, turning the bowden cable at the slide housing (No. 1) until distance (A) between the notch at the locking slide (No. 2) and the mark edge at the gate (No. 3) is 6 mm.

When turning the cable, use a second wrench to lock at the square of the slide housing (No. 4).

7. Align steering column stalk as follows:

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment