Removal

1. Place protective covers on fenders and remove hood. Disconnect battery ground strap. Open tie-wraps at bulkhead. Disconnect cable from cruise control actuator motor and remove hood.

2. Undo fuel lines betwen engine and body, using a second wrench to lock. Catch remaining fuel in a suitable container. Do not kink fuel lines.

3. Disconnect cable for throttle operation. Pull off oxygen sensor connector and undo bracket from manifold. Pull vacuum hose off pressure regulator.

4. Undo ground cable and wire clamp from clutch housing. Pull off vacuum hose from brake booster.

5. Disconnect twin- and multi-plug connectors. Disconnect vacuum hose from tank vent valve and manifold.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment