Removing and installing front impact sensors Note

The front impact sensors are placed high up on the left and right wheel house walls in the driver and passenger footwells.

The Installation position is determined by the mounting.

1. Disconnect battery and cover terminal or battery, respectively.

2. Remove control unit for cruise control and disconnect connectors T 19 and T 28 (for left-hand front sensor only).

3. Disconnect connector for front impact sensor.

4. Undo shear-off nuts using Special Tool 9259.


Special Tool 9259 Note

To tighten the shear-off nuts, use 1/4 inch Allen key.

The mounting locations at the body must be cleaned down to the bare metal.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook

Post a comment