Removing and installing hydraulic control unit Removal

3. Disconnect connector from transmission Note socket, turning bayonet lock to the left and

The control unit is removed along with the Pullin9 off connector, transmission wiring harness.

1. Drain ATF fluid.

1258-38

A = Bayonet lock

B = ATF pan mounting (hexagon head nut with washer)

2. Remove breather hoses from reservoir and remove ATF pan complete with reservoir.

A = Bayonet lock 1259-38

4. Unscrew hexagon nut for socket.

5. Remove ATF filter.

1257-38

6. Screw out six fastening screws (12 mm head dia.) and take offcontrol unit along with wiring harness.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment