Safety measures

Ignition and preparation should only be carried out by property qualified personnel under the supervision of a second, responsible person.

Allow airbag units to cool down after ignition and observe them carefully.

Avoid skin contact with airbag units which have been ignited.

- All other generally applicable accident prevention regulations must be complied with.

- Only ignite airbag units which are in original condition and properly installed.

- Ignite airbag units only in suitable open spaces.

- Use only the ignition equipment specifically intended for the purpose.

- First remove all loose objects from the air-bag expansion area.

- Anyone likely to be affected should be warned about the noise in advance.

- Use the whole length of the ignition device's cable in order to maintain a safe distance from the airbag unit which is to be ignited.

- Do not connect the ignition device to the power source until everything else is ready.

- Position yourself and anyone else involved in front of the vehicle.

- Ignite the airbag unir with the vehicle's doors closed but the tailgate/trunk lid or side windows open.

- If ignition fails to occur, do not approach the vehicle until approx. 3 minutes have elapsed.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment