Vehicles without airbag

Fit steering wheel provisionally. Adjust clearance between steering column switch and steering wheel.

Specification = 2-4 mm.

Tighten steering column switch screw.

Vehicles with airbag

1281-37

4. Fit connectors of ignition steering lock, instrument cluster and buzzer contact.

Vehicles with airbag

Using a depth gauge, set dimension 45 ± 0.5 mm. Tighten steering column switch. Measure between beginning of steering shaft and center of steering column switch.

1281-37

4. Fit connectors of ignition steering lock, instrument cluster and buzzer contact.

1289-48

5. Check ignition steering lock operation (operation of lock pin) and Keylock operation (page 37-205).

8. Fit airbag contact unit. Use two new screws. 11. Fit steering wheel. For airbag steering wheel, refer to page 68-53.

Note

Before fitting the contact unit, set the front wheels to the straight-ahead position and set the contact unit to the center position (approx. 4 1/2 turns from left-hand or right-hand full lock). The precise center position is indicated by the two arrows.

280-68

A new contact unit is locked in the center position. The lock is only removed after fitting the contact unit.

9. Shear off the shear bolts after all visual and functional checks of the relevant parts have been carried out.

10. Fit covers and trim panels.

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment