Alarm triggering and alarm output

The alarm functions can be triggered only in the primed state.

A non-blocked alarm input triggers an alarm in the primed state with an active signal. The alarm-triggering input then remains blocked for further alarm triggering until it returns to the inactive state. Then, following expiry of the inactive period of 10 seconds, it is again included in the alarm evaluation, provided that it was inactive for the entire inactive period.

In a priming cycle, the inputs Passenger compartment monitor, External 1 trigger a maximum of three alarms.

The alarm output is via:

Horn depending on the country

Direction indicators depending on the country

Interior lights asynchronous with the direction indicator lights, depending on the country coding

The alarm output with all associated actions is interrupted immediately in the event of deactivation.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment