Signal implausible

1. Check outside air / recirculation valve for smooth operation.

2. Pull off connectors A, B, C and D on the heating/air cond. control.

3. Pull off connector on the outside air / recirculation valve drive motor.

4. Connect ohmmeter to connector D 13 and drive motor connector pin 1.

Connect ohmmeter to connector D 5 and drive motor connector Connect ohmmeter to connector B 17 and drive motor connector Connect ohmmeter to connector C 8 and drive motor connector Connect ohmmeter to connector A 12 and drive motor connector

5. Check wire from connector D 13 to drive motor pin 1 for short to B+ and short to ground.

6. Check wire from connector D 5 to drive motor pin 2 for short to plus

Test point 10

Motor, outside air / recirculation valve

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment