Test point 10

Coolant temperature

Engine off (with engine cold) PST2 display:

Tester display corresponds to the ambient temperature.

Engine runs at idle speed at operating temperature PST2 display:

Tester display corresponds to the coolant temperature of 80 °C...100 °C.

Troubleshooting:

Resistance values:

Switch off ignition

Disconnect plug connection X3/1

Ohmmeter on pin 29 and pin 30 on the sleeve side Ohmmeter display at 20 °C: approx. 1 K£2

Switch ignition on

Measure voltage at plug connection X3/1 pin 29 and pin 30 on pin side

Voltmeter display: approx. 5 V

Switch off ignition

90 25 Diagnosis/Troubleshooting, instrument cluster

Reconnect plug connection X3/1 Remove connector of temperature sensor Pull off plugs I and II on the instrument cluster Switch ignition on

Measure the voltage between instrument cluster plug II pin 5 and

Measure the voltage between instrument cluster plug I pin 24 and ground

Voltmeter display: 0 V

Switch off ignition

Ohmmeter on instrument cluster plug I pin 24 and plug on temperature sensor pin 2

Ohmmeter display: < 5 Q,

Ohmmeter on instrument cluster plug II pin 5 and plug on temperature sensor pin 3

Ohmmeter display: < 5 Q

See also Input signals chapter, Test point 9, and Drive links chapter "Coolant warning light" and "Coolant temperature"

90 25 Diagnosis/Troubleshooting, instrument cluster

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment