Test point

Wrong door lock module Note

This fault concerns only USA vehicles. USA vehicles do not have the "Door secured" function.

1. Check the driver's side / passenger's side door lock module and, if necessary, replace it with a door lock module for USA vehicles.

3. Check the line from the alarm control unit plug I pin 30 to the door lock module for ground shorts.

- Ohmmeter on alarm control unit plug I pin 30 and ground.

4. Check the driver's side door lock module switch contact,

- Ohmmeter at plug connection X 11 pin A5 (sleeve side) and

Door not locked Display: < 5 Q

Test point 13

Left door secured but not locked Fault code 13

1. Pull off plug I on the alarm control unit.

2. Disconnect plug connection X 11 (driver's side).

90 01 Diagnosis/troubleshooting, alarm system

Fault, fault code

Possible causes, elimination, notes

Test point 14

Right door secured but not locked Fault code 14

1. Pull off the plug I at the alarm control unit.

2. Disconnect the plug connection X 12 (passenger's side).

3. Check the line from the alarm control unit plug I pin 32 to the door lock module for ground shorts.

Ohmmeter at alarm control unit plug I pin 32 and ground

4. Check the passenger's side door lock module switch contact. - Ohmmeter at plug connection X 12 pin A5 (sleeve side) and

Door not locked. Display: < 5 Q

3. Pull off the airbag control unit plug.

4. Voltmeter at alarm control unit plug I pin 33 and ground Display: 0 Volt

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment