Test point

Pot. mirror right horizontal This fault is stored in the following cases:

to the pot. right rearview mirror.

2. The potentiometer is faulty.

3. The control module is faulty. Elimination

Replace support with gear unit.

Actuate switch for memory seat adjustment.

The text in the fault memory changes from present to not present if the cause of the fault has really been eliminated.

If the fault is no longer present, erase the fault memory.

If the fault is still present, there is a fault in the wire.

For a fault in the wire, proceed as described below:

Disconnect mirror plug from the control module.

Disconnect plug at support with gear unit.

Use an ohmmeter to check for open circuit on the support plug Pin 5 and the mirror plug on the control module Pin 11.

Use an ohmmeter to check for open circuit on the support plug Pin 7 and the mirror plug on the control module Pin 4.

Use an ohmmeter to check for continuity on the support plug

If no fault is detected in the wire, replace the control module.

72 98 Diagnosis/troubleshooting, seat memory (System S 01)

Printed in Germany - 27, 1999

98672D1

Fault. Fault code

Passible causes, élimination, notes

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment