Test point 2

Signal, terminal 61

Ignition on Engine off PST2 display:

not present

Engine idling

PST2 display:

present

90 25 Diagnosis/Troubleshooting, instrument cluster

Engine idling

Measure voltage between both poles on the battery

Check generator in the case of deviations Switch off ignition

Pull off plug II on the instrument cluster Switch ignition on

Measure the voltage on the instrument cluster plug II pin 23 and ground

Voltmeter display: 0 V

Engine idling

Measure the voltage on the instrument cluster plug II pin 23 and ground

Voltmeter display: > 13 V

Switch off ignition

Disconnect plug on generator (terminal 61) Switch ignition on

Measure the voltage on the instrument cluster plug II pin 23 and ground

Voltmeter display: 0 V

Switch off ignition

Ohmmeter on instrument cluster plug II pin 23 and ground Ohmmeter display: «> &

Ohmmeter on instrument cluster plug II pin 23 and plug on generator (terminal 61)

Ohmmeter display: < 5 Q

90 25 Diagnosis/Troubleshooting, instrument cluster

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment