Test point

Airbag signal acknowledged Fault code 48

This fault is stored in the memory if the airbag control module transmits a signal to the alarm system control module after the airbag has been

Check whether the fault appears again.

If the fault reappears, pull off plug II on alarm system control module Ohmmeter on alarm system control module plug II pin 1 and ground

Check the entire system for operation.

Test point 47

Fault code 49

This fault is stored in the memory if the K lead has a short to ground for at least 2 s when the ignition is switched on.

Connect special tools 9616 and 9617 and switch on ignition. Connect ohmmeter to special tool 9616, pin 2 and to ground to check

Fault, Fault code _Possibie causes, elimination, notes_ _

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment