Test point

Central locking limit position safe not reached Fault code 59

This fault is stored in the following cases: - Open circuit in the supply lead to plug II pin 1 (terminal 31)

Short to ground or open circuit in the supply lead to plug II pin 8

Short circuit to voltage/ground or open circuit in the supply lead to

Short circuit to voltage/ground or open circuit in plug II pin 19

Fault, Fault code

Puiisibfg causes. elimination, note?

Door lock (driver/passenger) is faulty Elimination:

In the menu item Drive links, select "Secure doors" and carry out the function test

In the menu item Input signals, select "Driver's side secured" and "Passenger's side secured" and compare the switch positions with the input signals table.

Pull plugs I and II off the alarm system control module

Ohmmeter on plug II pin 1 and ground Ohmmeter display: < 5

Voltmeter at plug II pin 8 and ground

Voltmeter display: Battery voltage

If 0 V is displayed, check fuse C3

Voltmeter at plug II pin 9 and ground Voltmeter display: 0 V

Ohmmeter on plug II pin 9 ground Ohmmeter display: «> q

Ohmmeter on plug II pin 9 and plug on door lock (driver's side / passenger's side) pin 2 Ohmmeter display: < 5 Q

Voltmeter at plug I pin 19 and ground Voltmeter display: 0 V

Ohmmeter at plug I pin 19 and ground Ohmmeter display: °° Q

96 01 Diagnosis/Troubleshooting, Alarm system 132

Fault, Fault code_Possible causes, elimination, notes

Ohmmeter on plug I pin 19 and door lock (driver's side / passenger's side) pin 9

Ohmmeter display < 5 Q

Was this article helpful?

+1 0
DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment