Test point 6

Door lock barrel open/closed

1. Pull plug I off the alarm system control module.

2. Disconnect plug connection X 11 (driver's side).

Short to ground Fault code 06

3. Disconnect plug connection X 12 (passenger's side).

4. Check the wires from the alarm system control module plug I pin 35 to the door locks for short to ground.

Ohmmeter at alarm system control module plug I pin 35 and ground

5. Check driver's side door lock switch contact.

Ohmmeter at plug connection X 11 pin A2 (sleeve side) and ground.

Door lock actuated towards "Closed".

6. Check passenger's side door lock switch contact.

Ohmmeter at plug connection X 12 pin A2 (sleeve side) and ground.

96 01 Diagnosis/Troubleshooting, Alarm system 132

7. Check the wires from the alarm system control module plug I pin 15 Ohmmeter at alarm system control module plug I pin 15 and ground.

8. Check driver's side door lock switch contact.

Ohmmeter at plug connection X 11 pin A6 (sleeve side) and ground.

Door lock actuated towards "Open"

9. Check passenger's side door lock switch contact.

Ohmmeter at plug connection X 12 pin A6 (sleeve side) and ground.

Door lock actuated towards "Open'

<5fl

Test point 7

Central lock button closed Short to B+ Fault code 07

1. Pull plug I off the alarm system control module.

2. Check switch for central locking.

Voltmeter at plug I pin 29 and ground. Switch for central locking not actuated.

Switch for central locking actuated towards "Closed".

3. Disconnect plug connection on the switch for central locking.

4. Check the wire from the alarm system control module to the switch

Voltmeter at plug I pin 29 and ground.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment