Changing engine oil without filter

Precondition: Engine at operating tempera ture (70...90° C oil temperature)

1. Remove engine guard and right-hand side member panel. Undo the drain plugs in the crankcase and thermostat housing and drain engine oil.

Crankcase drain plug

605-03

Thermostat housing drain plug

2. Clean drain plugs. Always replace the seals. Tightening torque of drain plugs is 50 Nm (37 ftlb.):

at the thermostat housing

3. Fill with approx. 6 liters of engine oil. Run engine at idle and top up with approx.

3 liters. The oil change capacity is approx. 9 liters. Use only approved engine oils. Refer to Technical Information Handbook.

Check oil level at operating temperature and at idle speed (refer to Owner's Manual). Check engine, oil reservoir, lines and front oil cooler for leaks (visual inspection)!

1454-03

605-03

1454-03

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment