Check door and hood locks and safety catches of front hood for secure fit and correct operation

Checking for secure fit:

The fastening screws of the door lock, front and rear hood locks as well as the fastening nuts for the upper lock sections of the front and rear hoods must be tightened to 10 Nm

Functional check:

Door lock

When the door is closed, the door lock must engage into the lock striker in two stages and disengage again when the door opener (inside and outside) is operated.

Front and rear hood locks.

When the hoods (front and rear) are closed, the hood locks must engage as soon as the upper lock sections move into their seats and must disengage again when the hood release

Safety catch - front hood

After the hood lock has been released, the front hood must be held down by the safety catch. At the same time, this safety catch must engage into the retaining plate at its

When the hood is open, the retractor spring must pull the safety catch back to the stop against the baseplate of the upper lock sec-

145-03
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment