Cutting side section out of the body

Remove all accessories arid the interior, including convertible top!

Separating spot welds of the edge fitting

Use the spotweld cutter to separate spot welds between the edge fitting and wheel housing at rear.

Separating spot welds of the side section

Use the spotweld cutter to separate the spot welds between the side section edge and wheel housing edge at top and the B-pillar. Cut the side section in front of the side member at the outside with the body saw.

Separating spot welds of the side section at rear

Use the spotweld cutter to separate the spot welds between the side section and the wheel housing. Grind off MIG seams between the side section and cross mem-

Cutting side section from the rear centre panel

Use the body saw to cut off the side section so that that 5 cm of the side section from the joint to the outside and 25 cm to the rear remain.

Fitting side section in the body

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment