Insulating the gap between rear window and body

No. Operation

Instructions

Remove cover strip.

Loosen and remove cover strip of rear window.

Clean gap between rear window Wash out the gap between rear window and body with

Dry gap between rear window and Dry the gap between rear window and body using corn-body. pressed air all around the rear window.

Mask off rear window and body.

Apply masking tape around the rear window, making sure that the mounting section for the cover strip is

Apply masking tape all round the body opening for the rear window up to the edge of the gap.

5 Apply insulating material. Screw application nozzle (C) onto insulating material cartridge (B). Insert cartridge with nozzle into bonding gun (A).

Fill the gap between the rear window (mounting section) and the body completely with insulating material.

6 Remove excess insulating material. Strip excess insulating material above the gap between rear window and body off smoothly using a piece of cardboard.

Remove masking tape and instal cover strip.

Remove masking tape from rear window and body. Press rear window cover strip into mounting section

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment