The measured value always deviates from the set dimension in clockwise direction (small pointer on the dial gauge is between 1 and 3), i.e. if the dial gauge is set with a preload of 1 mm, the value deviating from 1 is taken as the shim thickness "S3" to be inserted.

Always round up or down to the nearest 0.05 mm (e.g. 1.63 to 1.60 mm).

8. After inserting the required shims, check the setting value "E" once again. A deviation of

Was this article helpful?

0 0
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment