Note

Do not use a hammer when fitting the transmission side cover (the gauge block plate held by magnets might fall off). Locate cover in correct installation position only by tightening the hexagon head bolts uniformly.

6. Using a socket wrench (24 mm A/F, e.g. Stahlwille No. 10 750), pull adjustable centering disc over spindle towards the outside until the measuring mandrel can just about be turned.

7. Turn measuring mandrel carefully until the dial gauge extension is vertical to the face of the drive pinion head. At this point, the pointer of the dial gauge is at its maximum deflection (reversing point) and the dial gauge must now be read.

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment