Notes on assembly and dismantling Dismantling

Compress coil spring using a coil spring compressor tool until the piston rod is

To loosen the bolting between piston rod and spring strut mount, hold a 7 mm open-end wrench against the piston rod. Caution: Do not under any circumstances use a power impact wrench to loosen or

Remove all parts from the piston rod. Note

When installing new parts, follow the allocation given in the spares catalog.

Preparatory work and notes on

- Use new fastening nut when attaching piston rod to spring strut mount.

Vibration dampers of different makes must not be installed on the same axle.

- It is recommended that coil springs always be replaced in pairs.

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment