Partially replacing fender connection panel

Complete all body straightening operations in this area before the fender connection panel is

No. Operation

Separate spotwelds of fender connection panel to door sill

2 Cut off fender connection

Align separating area of fender connection panel remaining attached to body and grind

Prepare and offer up fender connection panel

Weld fender connection panel into place

Instructions

Separate spotwelds of fender connection panel to door Cut off the narrow leg of the fender connection panel

Cut down fender connection panel along wide leg to approx. 20 mm and align with wheel housing. Drill fender connection panel for plug welding in the

Using a rotary wire brush, remove factory primer from welding areas of fender connection panel.

MIG-weld fender connection panel along both sides, running an intermittent full seam.

Plug weld fender connection panel to door sill using

50 74 56 Replacing wheel housings Replacing part of front end

The following body spare parts are required for the "Replacing part of front end" sectional repair

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment