Refitting the transmission

Note:

Apply a very thin coat of Olista Longtime 3 EP to input shaft splines (for corrosion protection only).

Engage release fork into release bearing and use a suitable length of adhesive tape to locate it provisionally in installation posi-

2. Refit transmission to engine.

3. Engage release lever shaft with seals into release fork.

4. Remove locating tape from release fork across assembly hole.

5. Install needle-roller bearing, mount cover and bracket and tighten down with M 6 x 16 hexagon head bolt (also refer to assembly notes, Group 30, page 30-1).

1390-10

34 35 37

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment