Removing and installing

Removal

Take off battery ground cable.

2. Draw off refrigerant with service equipment.

3. Remove heater/ A/C unit cover (old version is held in place by 2 bolts with washers, new version is fitted with spring clamp).

4. Remove Central Electrical System.

5. Remove wiring harness cover.

6. Detach electrical connector at fan housing cover and place Central Electrical System on fender (use fender protectors).

7. Detach connector from blower final stage.

8. Remove firewall.

9. Separate A/C piping from expansion valve. Plug ports and piping immediately with airtight seals.

10. Undo and take out expansion valve. Plug piping to evaporator immediately with airtight seals.

1966-87

Installation

Remove plugs only directly before refitting. Replace O-rings and coat lightly with refrigerant oil.

Refrigerant oil drawn off from an A/C system that has already been operated must not be reused.

Tightening torques:

M 5 bolt M 6 bolt

Manual transmission vehicles.

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment