Removing and installing immobilizer control unit

Removal

1. Remove left seat.

2. Remove shear bolts using a cross cut chisel and remove cover.

Porsche 993 Immobilizer Connector
2006-24

3. Loosen control unit and unplug connector. Installation

Break off new M 6 x 13

shear bolts, part no. 999 074 051 02 using a

Removing and installing control unit of RS

Removal

Loosen flanged nut using a cross cut chisel. Installation

Tighten new M5 flanged bolt with stop teeth (part no. 999 507 472 02) using circlip pliers, e.g. Hazet 4843a-12.

Immu Immobilizer Unit Serial Number
2219-24

Note

Tighten the control unit carefully. The plastic mounting lugs can break off. The serial number must not be left on the control unit after installation. The two stickers must be handled confidentially together with the customer. One sticker must be attached to the invoice and the second sticker given to the customer.

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Responses

  • Jesse
    How to find serial number to immobilizer for 993?
    6 years ago
  • ROMANO MAZZI
    How to repair porsche 911 seat control unit plastic cover?
    3 years ago
  • SOPHIE
    Where located immobilizer unit on porsche cayenne?
    2 years ago
  • niklas fuhrmann
    Are immobiliser units interchangeable on 996 porsche?
    10 months ago

Post a comment