Removing and installing magnetic clutch

Removal

1. Use a standard strap wrench to keep thrust plate from turning and undo mounting bolt.

1927-87

2. Screw a M 8 bolt into the thrust plate threads until the thrust plate can be taken off by hand.

3. Take out spacers and remove circlip with a pair of standard circlip pliers. Pull off pulley manually.

4. Unscrew solenoid coil wire from compressor housing. Remove circlip. Take solenoid coil off the compressor housing.

Installation

1. Place solenoid coil into compressor housing. Lock pin must engage into the lock pin hole.

1928-87

2. Fit circlips. The chamfered face of the circlip points upward (towards mounting bolt).

3. Tighten thrust plate mounting

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment