Removing and refitting the transmission Refitting

Apply a very thin coat of Olista Longtime 3 EP to input shaft splines (for corrosion protection only).

1. Engage release fork in release bearing and use a length of suitable adhesive tape to locate it provisionally in the installation position.

2. Connect transmission to engine.

3. Engage release shaft with seals into release fork.

4. Remove locating tape from release fork across the assembly hole.

5. Fit needle-roller bearing, mount cover and bracket and tighten with M 6 x 16 hexagon head bolt (also refer to assembly notes, Group 30, page 30-1).

Note:

1390-10
Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment