Replacing part of front end

Cutting closing panel and gusset plate completely and wheel housings and side members partially out of body

Operation

Instructions

Place vehicle on straightening Place vehicle with fitted ancillaries onto straightening equipment attachment set and tie down vehicle.

Cut off wheel housings

Cut off damaged wheel housing areas using a body saw.

Cut off side members

Cut off damaged areas of side members with body saw.

Separate spotwelds of gusset

Separate spotwelds between gusset plate, spare wheel well and wheel housings with a spotweld cutter.

Separate spotwelds of

Separate spotwelds between closing panel and spare wheel well with a spotweld cutter

Shorten side member to give an offset with regard to the wheel housings

Shorten side members with body saw and spotweld cutter until an offset of approx. 50 mm is produced between side member and wheel housing.

Replacing part of front end

Fitting closing panel and gusset plates completely and wheel housings and side members partially into body

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook


Post a comment