Diagnosistroubleshooting seat memory System S 01

Printed in Germany - 28, 1999

99672D1

Test point 25

Pot. mirror left vertical

Fault code 27

This fault is stored in the following cases:

1. There is a short circuit in the wire to the pot. left rearview mirror.

2. The potentiometer is faulty.

3. The control module is faulty Elimination:

Replace support with gear unit.

Actuate switch for memory seat adjustment.

The text in the fault memory changes from present to not present if the cause of the fault has really been eliminated.

If the fault is no longer present, erase the fault memory.

If the fault is still present, there is a fault in the wire.

For a fault in the wire, proceed as described below:

Disconnect plug at support with gear unit

Disconnect mirror plug from the control module.

Use an ohmmeter to check for continuity on the support plug Pin 5

Use an ohmmeter to check for open circuit on the support plug Pin 3 and the mirror plug on the control module Pin 5

If no fault is detected in the wire but the fault is still present,

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment