Function of individual components

The control module is installed on the passenger's side below the passenger's airbag unit. If the control module is replaced, the following points must be observed:

1. Coding of the vehicle type

2. Calibration of the control module

3. Adjustment of the headlights

If a new control module is installed, fault codes "6 Control unit coding error" and "7 Calibration not performed yet" are stored.

Remedy:

Start the automatic control module search and code the vehicle type. Then perform a calibration and then erase the fault memory. Adjust the headlights after calibration.

2. Main light switch

The HBA system is activated when the parking light is switched on (terminal 58). The headlights are set to high-beam position when the high-beam switch is operated.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment