Test point 1
Outer right sensor faulty Fault code 1
This fault is stored in the memory in the following cases:
1. Open circuit in supply lead to outer right sensor.
2. Short circuit to B+ in supply lead to outer right sensor.
3. Short circuit to ground in supply lead to outer right sensor. Remedy:
Erase fault memory, move shift lever out of reverse gear and switch off ignition. Next, switch ignition back on, move shift lever into reverse
If the fault reappears, check the plug on the sensor for open
If no open circuit can be detected, check sensor plug, pin 1 to pin 4 and pin 1 to pin 2, for continuity using an ohmmeter. There should be
If no short circuit can be detected, replace sensor.
Was this article helpful?