Test point 12

Hall-effect sensor height adjustment, open circuit Fault code 12

This fault is stored in the following cases:

1. There is an open circuit in the wire to the Hall-effect sensor

2. The Hall-effect sensor is faulty

3. The control module is faulty. Elimination:

Check plug on control module for contact and damage Check wire to sensor for damage.

Once the cause of the fault has been found and eliminated, actuate the height adjustment switch. The text in the fault memory changes from present to not present if the cause of the fault has really

If no fault is detected in the wire on the sensor, replace the electric

If the fault is still present, replace control module,

Porsche Classic Models

Porsche Classic Models

The History of Porsche Cars through its generational changes. A must have ebook for any Porsche fanatic, this ebook is a reference book for Porsche enthusiasts. Discover all there is to know about the greatest Porsches ever made. All models are fully described and illustrated providing a definitive production history plus an accurate guide to original specs and equipment.

Get My Free Ebook

Post a comment